Northwest corner of Faerûn map in 12 pieces

Northwest corner of Faerûnmap

This map features in the Sword Coast Adventurer’s Guide, which describes the locations on the map in greater detail.(https://dnd.wizards.com/resources/faerun-map)

AMS ready but if you want you can print on a single color printer by doing the following filament swaps:

Set the layer height to 0.08mm and a base layer of 0.16mm, only one wall and infill to 100% then:

• Start with black
• Swap to light blue at layer 11(0.96mm)
• Swap to beige/orange at layer 14(1.2mm)
• Swap to white at layer 18(1.52mm)

THE PROFILES ARE SCALED IN LENGHT AND WIDTH TO 75% OR IT WON'T UPLOAD FEEL FREE TO UPSCALE BUT DO NOT TOUCH Z!!!

You will see only one print profile because of makerworld's limitations so I uploaded on printables at this link where you can see all of the files and download them importing them into the first printing profile settings(you also need to apply the same filament swaps)

Happy printing and don't forget to show your creations!