Mag Stack- AR Mag mount

I wanted a way to mount my AR-15 mags (Pmags, hex mags, Lancer mags or any standard sized AR-15 style mag) on the exterior of my safe and didn't like any of the vertical storage designs so I can up with this. I also created a version that is for wall mounting that saves a bit on filament and time for anyone interested.

These will also hold Mean Arms 9mm Endo and Exo mags, as well as 6mm ARC mags.

There is also a very small shelf designed on the top for a small box of ammo, but will hold other items as well. I use the top of one of mine to store a 10/22 mag.

I printed mine in PLA and I have had these mounted in a garage for over a year now with no issues.

For the wall mount version, the holes are set for #8 drywall screws or screws with a diameter of less than 4.2mm and you will need two per unit.

The magnetic versions require two M3-10 flat head screws and two M3 heat inserts. Along with these, you will need two of these magnets per each Mag Stack, and 2 inch wide grip tape.

Warning: The magnets are very strong, so ensure the Mag Stack is level before getting too close to the metal. The grip tape keeps the Mag Stack from sliding down, but will also scratch the exterior of your safe especially if you move them once mounted, if it has a clear coat finish.

For those of you that don't like logos, note that once the mags are in their slots in the middle, they will cover the logo.

Please message me with questions or concerns.