Pinball Astronaut

I located a pinball astronaut design on MakerWorld (https://makerworld.com/en/models/1636222-pinball-spaceman-uses-standard-pinball-spins?from=search#profileId-1728558) and developed a customized version tailored specifically for our local tournament.  The models were printed using Bambu Labs Jade White filament to achieve a clean look.  

The pinball, spins freely like a fidget spinner.  Any normal sized pinball should work.  I am using my old pinballs that I replace from games.  

For trophy use, I inscribed the tournament name on the base and designated 1st through 4th place on the flags. For pinball enthusiasts, their initials were added to the backpack for a personalized touch.

During printing, I selected .16mm balance quality, utilized a prime tower and ironing, and enabled support as required. These should be enabled in the profile already. 

I also used PLA Glow filament under black lights in the arcade, which resulted in cool effects. The models are designed to accept standard pinballs, produced on both P1S and H2D printers. 

As I continue to refine my skills, I welcome any advice or suggestions from peers.