Hydration Bladder Drying Hook for suspension

[ Model Overview ]   

This model is a simple “S” shaped hook to help you suspend your Hydration Pack on a typical Clothesline. The hook is intentionally bulky to create a separation inside the bladder faces to improve air circulation. The hook borders are rounded and chamfered to prevent internal damage to the bladder surfaces.

[ Dimensions of the hook]   

286mm long x 110mm wide

Cross section (inserted into your bladder) = 20mm x 18mm

[ Printing ]  No supports required for printing for all the parts.  Material: PETG-HF in black worked fine for my application but PLA should also be fine.  If your printer creates little printing artefacts, I suggest you quickly sand the surfaces that will contact your bladder to prevent punctures.

[ Licence and terms of use ]

When you download the files, you understand and agree that this content is licensed under a Standard Digital File License.

You can : 

(✔) Personal use : Download the digital file(s) for free and print 3D parts from the digital file(s) for your own use.

You cannot :

(X) Sell parts : manufactured from the digital file(s) or any derivative of the digital file(s), no matter how the parts are made, how many parts are made.  This also prohibits you from selling parts made from the Digital file(s) on sites such as eBay, Etsy, FB marketplace or any other location. 

(X) Share the digital file(s) or resell them. 

Liability disclaimer and use:

By downloading the digital file(s) and making a 3D printed derivative object from it, you agree that you're doing it at your own risk and understand the limitations of 3D printed parts.  The digital file(s) are not a product and the design do not give any express or implied warranty that, any product made from the digital file(s), will work or perform in a certain way.