Print Profile(2)
Bill of Materials
Description
Kawaii peach magnets with different facial expressions. Read instructions below for how to do 5 colors with 1 AMS.
The magnets came in 2 sizes
- Small - requires 0.2mm nozzle
- Large - standard 0.4mm nozzle
Both sizes use 6x3mm magnets by default. This is configured with a negative modifier block in the slicer so you're also free to change to a different magnet diameter if you'd like. The hole is only 1mm deep so the magnet sticks out a little - this makes the magnets easier to pick up.
Instructions
The stem and the facial features do not overlap in layers. On plate 1 and plate 2, start by loading brown in the slot for black. There's already a pause in place in the profile. When you hit the pause, swap the brown filament to black filament.
Other Designs
 |  |
Boost Me (for free)
If you're feeling generous and like what you see, Buy Me a Coffee or Send me a tip.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)