stable clamp with quick adjustment
Print Profile(2)
Description
Project Screw Clamp for all Printer Types.
In the design, the main focus was not only on functionality and stability, but also on the screw clamp being very easy to print without prior knowledge.
NEW: also in large for the H2 series
Advantages:
- well-thought-out design thanks to active practical use
- all parts can be printed without support material.
- there is a suitable rail length for every printer type.
- extremely easy assembly! Parts are inserted and lock themselves
- ball plates compensate for unevenness and non-parallel planes
Function and Design:
- the clamp rail deliberately does not have a right angle but is inclined 2° inwards, so that it almost reaches a 90° angle again when the screw is tightened.
- Even if it goes below or above a 90° angle, this is no problem at all, as the spindle plate is mounted in such a way that it compensates for slopes and unevenness.
- The grooves on both sides of the clamp rail provide additional stiffening while keeping the overall height low.
- Spindle and spindle plate are reinforced in the hollow space, so that they have increased stability (especially at the transitions) and do not break.
- The pressure plate is simply inserted onto the clamp rail into the two guide grooves and locks securely and firmly with a click.
- After the spindle has been screwed through the spindle bracket, the spindle plate is pressed from above with the ball into the spindle until it clicks into place and can rotate freely.
Quick adjustment by slightly tilting the spindle bracket
Material:
Materials to be used should have a certain stiffness, such as PLA
Of course, carbon fiber reinforced filaments etc. can also be used.
Rail Lengths:
For print plates with 180x180mm: Length 175mm
For print plates with 254x254mm: Length 250mm
For H2-Series: Length 350mm
Boost Me (for free)
Enjoy it? Then I would be happy about a free boost. Many thanks for that.
Don't forget to like, rate, and follow so you don't miss any new projects.
Also check out my other useful and practical everyday helpers!
Feel free to post pictures of your prints in the comments
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (139)