Pass Royale/Keychain - Clash Royale
Print Profile(1)
Description
Print Settings:
- Nozzle Temp - 220 (Silk+ PLA)
- Bed Temp - 60 (Silk+ PLA)
- Layer Height - 0.16/0.2mm
- walls/shells/perimeter - 2-3
- Infill - 10%
- Adhesion - Skirt/None
Using glue is a safe option if your printer bed has problems with adhesion
Boost Me (for free)
I would really appreciate if you'd boost me, I worked really hard on this model, and it would also help me towards the goal of getting the H2D. Thanks :)
Print Settings:
- Nozzle Temp - 220 (Silk+ PLA)
- Bed Temp - 60 (Silk+ PLA)
- Layer Height - 0.16/0.2mm
- walls/shells/perimeter - 2-3
- Infill - 10%
- Adhesion - Skirt/None
Using glue is a safe option if your printer bed has problems with adhesion
Boost Me (for free)
I would really appreciate if you'd boost me, I worked really hard on this model, and it would also help me towards the goal of getting the H2D. Thanks :)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)