blood and plunder 8mm magnet mast base
Print Profile(1)
Description
This is a new base to hold an 8mm magnet to allow your blood and plunder sloop to have removable masts. It will require you to drill out the original hole for the masts to 8mm. I used a 5/16 drill bit which got it almost there and used a file to get it just larger than the magnet. Then you print the base, and it will work like a clamp to hold the masts up. Alternatively, you can also glue the 3d printed part in if you don't want it floating around. The magnets fit press fit, glue optional. I only have the sloops, so I don't know the dimensions of the other ships to provide a base for those.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)