Search models, users, collections, and posts
Heewing T1-Ranger Support Camera FPV(19mm)
IP Report
Print Profile(1)
0.2mm layer, 4 walls, 25% infill
Designer
17 min
1 plate
Open in Bambu Studio
Boost
7
14
0
0
12
10
Released
Bill of Materials
List other parts
- Vis M2 (minimum 18mm) x 1:
- Écrou M2 (4,2 mm x 1,5 mm) x 1:
Description
Content has been automatically translated.
19mm FPV Camera Mount for T1-Ranger Heewing – Tail Mount
Mount designed to hold a 19mm FPV camera, to be installed on the tail of the T1-Ranger airplane. (Drilling a hole in the tail will be necessary for the mounting screw)
Attachment:
- 1 M2 screw, minimum length: 18mm
- 1 M2 nut (4.2mm x 1.5mm)
- The small M2 screws provided with the camera to attach it to the mount.
Printing:
Can be printed in PLA, PETG, PLA Aero, etc. The material is not critical given the small size of the part.
The photos show an example printed in PLA Aero with 1 wall.
Recommended profile: 4 walls, 25% infill. →This setting adds approximately 1g compared to the lightest print, but increases strength
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (0)