DashCam Windshield Adapter 622GW

Hi.

This is a part of the NextBase Dash Cam 622GW.
Reason to print this:
My dad's windshield got a crack, and it's almost impossible to get this piece with the glue sticker off the glass. In order to get a new one, you have to buy the whole new arm.

So I bought a new one, took my measurements, and now we can print this little piece every time this happens again.

I printed this in ASA for temperature resistance and on a smooth plate to get the best surface for the sticker.
Only the 3M sticker you can buy on Amazon.

_________________________________________________________________________________________
If you like my work, feel free to show your support, or if you have any questions, let me know in the comments. And if you'd like to buy me a coffee, you can do so via PayPal. It is totally up to you.
paypal.me/Kasjo
My models are always free for everyone.

_________________________________________________________________________________________
Hi.

This is a part for the NextBase Dash Cam 622GW.
The reason for printing this part is as follows: If the windshield ever needs to be replaced, this piece is difficult to remove from the glass. The only way to get this part is to order the entire arm again.
I did that and immediately took measurements. From now on, this part can be reprinted.

I used ASA for this with a smooth plate so that the sticker adheres best and withstands temperature fluctuations. The adhesive sticker can be purchased on Amazon.

_________________________________________________________________________________________
If you like my work, feel free to like it. Let me know if you have any questions and ask them in the comments. If you'd like to buy me a coffee, you can do so via PayPal. This is entirely up to you.
paypal.me/Kasjo
My models are always free for everyone.