Hueforge Tecna

HUEFORGE TECNA WINX

Di seguito i parametri di stampa:

Project: tecna.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 133.33x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.99998mm

Filaments Used:
    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #aa00ff PLA+ Esun Magenta  Transmission Distance: 4.5
    #ff749e PLA+ Esun Pink  Transmission Distance: 5
    #ddd7c7 PLA+ Esun Bone White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #7 (0.64mm) swap to Magenta
    At layer #8 (0.72mm) swap to Pink
    At layer #14 (1.2mm) swap to Bone White for the rest.