Cyberbrick Wheelbarrow 1:12 - Free 3D Print Model

Search models, users, collections, and posts

Biigworm

Miniatures>Other Miniatures

IP Report

Print Profile(1)

All

A1 mini

X1 Carbon

P1S

X1E

H2D

P1P

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.16mm layer, 2 walls, 15% infill

Designer

2.5 h

5 plates

4.9(14)

Open in Bambu Studio

Boost

287

718

353

201

Released

Description

This is a miniature Wheelbarrow I made with the Cyberbrick Logo embossed inside, scaled at 1:12

I designed this to be printed in any colors you would like without the need for an AMS. All you will need is a little super glue and maybe an Exacto knife for cleanup.

The bucket attaches to the frame using printed push pins, and the wheel spins freely!

Iv attached a file with some build notes that may help during assembly.

Enjoy!

Documentation (1)

Other Files (1)

Cyberbrick Wheelbarrow Build Notes.txt

Comment & Rating (17)

@user_3743200071

Print Profile

0.16mm layer, 2 walls, 15% infill

this is a fantastic, print, fun detail absolutely adorable. I did send small children out of the room when I had to put the little connecting pieces in the wheelbarrow the little tiny rivets. I found a trick was to use a bolt with a flat end to press it down while I pushed the wheelbarrow and frame together if that helps anybody else!

@Marcus9975

Print Profile

0.16mm layer, 2 walls, 15% infill

Excellent part everything went smoothly and a very good print profile

Show original

@user_3056543832

Remember guys, you will need 2 cyberbrick hardware kits per wheelbarrow 😅

@user_1700982295

make the wheelbarrow itself motorized

@MarkFSBS

Print Profile

0.16mm layer, 2 walls, 15% infill

Printed very well no issues and everything snapped in like it was supposed to. The wheel spins very nice as well, great deisgn!

@user_962508486

in the process of making mine! cant wait

@RM3DPrints

Print Profile

0.16mm layer, 2 walls, 15% infill

Great print.

@19297TH45268

Print Profile

0.16mm layer, 2 walls, 15% infill

@user_2926467660

Print Profile

0.16mm layer, 2 walls, 15% infill

@Geelkop

Print Profile

0.16mm layer, 2 walls, 15% infill

(Edited)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.