Storage Box with 20 cm Dice Arena

This box was specially designed for the dice game “Noch mal!” but is also suitable for many other dice games.
It combines a dice arena (Ø 20 cm) for controlled and quiet rolls, a removable lid with a screwed ball handle and four pen holders, as well as a removable insert for score pads, cards, and dice.
Optionally, the arena can be equipped with a precisely fitting felt insert (readily available, e.g., at Amazon).

Features

• Specially developed for “Noch mal!”, universally suitable for many dice games
• Dice arena Ø 20 cm in the bottom part – optionally with felt insert for quiet play
• Removable lid with central hole for threaded ball handle
• Four pen slots on the lid rim
• Removable insert with two large compartments (pads/cards) and separate dice compartment
• Print-friendly design – no support structures needed

Parts & Files

• 01_Titelbild.jpg – closed box with text
• 02–06 GIFs – show functions and usage
• 07_Explosionsansicht.jpg – overview of all components
• STL files:
  • Body (Arena)
  • Lid (with threaded receptacle)
  • Ball handle (with thread)
  • Insert (compartments)

Print Settings (FDM Recommendation)

• Material: PLA or PETG
• Nozzle diameter: 0.4 mm (0.6 mm possible)
• Layer height: 0.20 mm
• Perimeters: 3
• Infill: 15–25 %
• Top/Bottom: 4–5 layers
• Support: off
• Brim: 3–5 lines recommended for lid and insert

Assembly

1. Print Body (Arena).
2. Optional: Insert or glue in felt insert (Ø 20 cm).
3. Place insert into the arena.
4. Screw the ball handle into the threaded receptacle of the lid.
5. Place the lid on.
6. Insert pens into the holders.

Suitable for

• “Noch mal!”
• “Qwixx”
• “Knister”
• “Ganz schön clever”
• “Yahtzee” and many other dice games