Ferrari F1 Lightbox - Free 3D Print Model

Search models, users, collections, and posts

Urban Dots 3D

Household>Decor

IP Report

Print Profile(1)

All

P1S

P1P

H2D

X1E

X1 Carbon

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

7 h

4 plates

4.9(11)

Open in Bambu Studio

Boost

155

407

251

Released

Description

The bottom cover is customizable. You can change its 3D design and add your own name, for example.
For this lightbox, you'll need 5-volt LEDs, a USB cable, glue to hold all the parts together, and optional magnets.
The magnets (optional) will be used to attach the bottom box to the customizable name cover, which in this case is the Ferrari F1 cover. If you don't have magnets, you can also use glue.

Comment & Rating (17)

@auntjuju2233

Print Profile

0.2mm layer, 2 walls, 15% infill

thanks.

(Edited)

@user_2234208527

Print Profile

0.2mm layer, 2 walls, 15% infill

@Djohn2800

How to have a pause at the right place since with the AMS we only have 4 colors… 🫣

Show original

@B0mbis

Configure that green and white are in the same position when printing and you manually change the white and green as they have a color in between and it gives you time

Show original

@awhite24

Replying to @B0mbis :

Can you be more specific? All the colors print on the same layer.

@B0mbis

Replying to @awhite24 :

When printing starts, when the white finishes, manually remove the filament and put in the green one. When the green finishes, put the white back because in layer 2 it will repeat the same cycle. You will have to do it on each layer, it's a pain but it's the only solution I found for now

Show original

@calogero19

Boosted

Magnificent thank you very much

Show original

@user_3356572303

nice idea like it

@user_2395969165

Print Profile

0.2mm layer, 2 walls, 15% infill

100 points great job!!

Show original

@Bastos73

Print Profile

0.2mm layer, 2 walls, 15% infill

@hkmtkbgl

Print Profile

0.2mm layer, 2 walls, 15% infill

@CharlesAube

Print Profile

0.2mm layer, 2 walls, 15% infill

@user_2222690809

Print Profile

0.2mm layer, 2 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.