Search models, users, collections, and posts
Fein Multimaster storage f. sanding sheets / paper
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
3.9 h
3 plates
Open in Bambu Studio
Boost
42
143
3
2
90
55
Released
Description
A storage box for the sanding sheets / sandpaper with an edge length of 80mm for the Fein Multimaster AMM700 and AMM700.
Amount of containers can be varied by user. Different connector heights are provided, as well as different fits for the pin.
Was trying/playing with a printed spring locking mechanism, works quite okay for the small diameter.
Instructions:
- The grit text can be changed using the text tool in the slicer.
- After printing push the small head of the spring mechanism down (~1mm) using pliers to ensure it is working.
- Press the pin into the connector using a clamp or something similar. The fit should be quite thight.
- To disassemble I would recommend drilling a hole at the bottom of the connector to push the pin out. Otherwise stuff may break.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (3)