Action Comics 1 (Superman's First Appearance)

Action Comics #1 (cover dated June 1938) is the first issue of the original run of the comic book/magazine series Action Comics. It features the first appearance of several comic-book heroes—most notably the Jerry Siegel and Joe Shuster creation, Superman—and sold for 10 cents (equivalent to $2 in 2021). It is widely considered to be both the beginning of the superhero genre and the most valuable comic book in the world.

Project: actioncomics1superman.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 171.23x250mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 4.64mm and the Actual Thickness is 4.16mm

Filaments Used:
    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #724e3d PLA PolyTerra Army Brown  Transmission Distance: 0.3
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    #cca897 PLA PolyTerra Pastel Peanut  Transmission Distance: 0.5
    #f0be02 PLA PolyTerra Savannah Yellow  Transmission Distance: 3.5
    #f5f0ec PLA Panchroma Satin White  Transmission Distance: 3.8
    #345316 PLA PolyLite Jungle Green  Transmission Distance: 0.5
    #0066d9 PLA PolyLite Azure Blue  Transmission Distance: 3
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
This print uses 9 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Army Brown
    At layer #13 (1.12mm) swap to Blue Gray
    At layer #17 (1.44mm) swap to Pastel Peanut
    At layer #19 (1.6mm) swap to Savannah Yellow
    At layer #24 (2mm) swap to Satin White
    At layer #27 (2.24mm) swap to Jungle Green
    At layer #29 (2.4mm) swap to Satin White
    At layer #34 (2.8mm) swap to Azure Blue
    At layer #40 (3.28mm) swap to Satin White
    At layer #45 (3.68mm) swap to Pastel Peanut
    At layer #47 (3.84mm) swap to Red for the rest.