The Blooming Beauty – The Showstopper - Free 3D Print Model

Search models, users, collections, and posts

H3iD3R

Art>Sculptures

IP Report

Print Profile(2)

All

H2S

P1S

A1 mini

H2D Pro

P1P

H2D

X1 Carbon

X1E

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

2.2 h

1 plate

0.2mm layer, 2 walls, 15% infill

1.9 h

1 plate

5.0(1)

Open in Bambu Studio

Boost

Released

Description

The Blooming Beauty – because some flowers never wilt, no matter how many seasons pass! 🌸

There are more flowers in my workshop, but this one? This one is the diva. Always standing tall, always ready to be admired. Perfect for desks, shelves, coffee tables — or anywhere that needs a touch of elegance without the watering schedule.

When creating this piece, I used both AI-assisted design ideas and a healthy dose of Blender and Meshmixer magic. The result? A floral showpiece that looks like it’s just been kissed by the morning sun.

My inspiration? My living room’s empty vase that looked like it was begging for something special. I decided to give it a companion that wouldn’t fade or need replacing — and so, The Blooming Beauty was born. She’s stunning, she’s low-maintenance, and she’s forever in full bloom.

If you have any complaints or find an issue, please mention it in the comments so I can fix it.

flower

3d printed flower

blooming showpiece

decorative 3d print desk ornament

3d printed decor

floral sculpture

home decor

Comment & Rating (10)

@Hayanali

For anyone interested, here’s a quick look at the front and back of the model so you can see exactly how it prints. The back is designed flat to make it easier to place against walls, desks, or shelves.

@user_67722192

Hi, I’m Michael and I would like to say your work is absolutely BEAUTIFUL!!!!!!!! I am printing one now and I went to look at it and not sure how big it will be when finished but in your picture it looks like it’s 8-10 inches tall but in my P1S it looks like it is flat on the back and about 4” tall. is this correct or am I printing the wrong file It looks beautiful but in your picture it looked to me like it’s a full sculpture. is this correct? Thank you very much for sharing your STUNNING WORK!!!

The designer has replied

@Hayanali

Hi Michael, thanks a lot for your kind words! 🙏 I really appreciate it. About your print — I’m not exactly sure which file you selected to print. Could you let me know which file you used and also which slicer software you’re running (like Bambu Studio, Creality, etc.)? The model itself isn’t flat on the back — everyone else who has printed it so far hasn’t mentioned that issue. So I’m not sure why it’s showing up flat on your side, but with the file and slicer info I can try to help figure it out. Also, if it’s just the size that looks smaller, you can always scale it up or down directly in your slicer to match the size you want.

@user_67722192

I just noticed your reply and you’re welcome. I will take a quick look and see. Be right back

@user_67722192

I only show one plate but it says it took 2 hrs and I think I showed 36 grams of PLA

@user_67722192

Hello, I printed this yesterday and I was a bit disappointed because in your picture and description it doesn’t let you know a size and the photo it appears to be a full sculpture and we. I noticed how small it was and flat on the back I was disappointed. The photo is beautiful but deceiving and I would add some definition in the details. I’m sorry I’m not trying to put your piece down at all it just fooled me. thank you for sharing

The designer has replied

@Hayanali

Thank you so much for your honest feedback — I really appreciate you taking the time to share it. I’m very sorry about the confusion with the size, that’s my mistake for not making it clearer in the description. I’ll update the listing so it’s more obvious going forward.

@user_67722192

Replying to @Hayanali :

I took a closer look at your photo after I had written this review and after looking closer it is my fault for not taking a closer look. I can see now that it is small and I retract my original review and update to, I jumped the gun on that review and owe you an apology. Please accept it. Thank you very much for your time and work. Forgive me please

@user_67722192

Print Profile

0.2mm layer, 2 walls, 15% infill

print quality was good, Thank you

@Hayanali

I usually test my prints on a Creality printer as well. Please note that the model size can be adjusted in your slicer software according to your preference. The original dimensions are: Millimeters (mm): 44.28 × 21.98 × 51.13 mm Centimeters (cm): 4.43 × 2.20 × 5.11 cm Inches (in): 1.74 × 0.87 × 2.01 in You can scale it up or down depending on how large you’d like the final piece to be.

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

The Blooming Flower - Snaps together!

Biochem

2 k

1.4 k

Blooming Lotus Lamp Shade

Jackalolz

2.8 k

2.1 k

Beauty and the Beast

lucamoretti86

841

1.2 k

GIF

Blooming Flowers

Black Shark