P!nk - Hueforge - 3 colours

I would try to just give a reason to raise your glass to an icon, but with an artist like p!nk there's no need. 
So take you and your hand, load your filament for this print! 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
IF YOU WISH TO SCALE PLEASE DO NOT CHANGE Z HEIGHT

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.64mm and the Actual Thickness is 1.68mm

Filaments Used:
    #ec008c PLA Bambu Magenta  Transmission Distance: 3
    #ffffff PLA sunlu white  Transmission Distance: 6.8
    #000000 PLA sunlu Black  Transmission Distance: 0.1

This print uses 3 unique filaments

Swap Instructions:
    Start with Bambu Magenta
    At layer #6 (0.56mm) swap to sunlu white
    At layer #11 (0.96mm) swap to sunlu Black
    At layer #13 (1.12mm) swap to sunlu white for the rest.