HDZero Googgle TrueRC X2 AIR 5.8 MK II Adapter

Description (English):
This adapter is designed to securely and precisely mount the TrueRC X² Air 5.8 MK II antenna onto HDZero Goggles.
It ensures a stable fit, optimal alignment, and prevents the antenna from rotating unintentionally.
Fits HDZero Goggle
Compatible with TrueRC X² Air 5.8 MK II
Strong and easy-to-install mount
Optimized for 3D printing
Requires M2 screws and M2 heat-set inserts for assembly
Print recommendations:
Material: PETG or ABS (for better heat resistance)
Layer height: 0.2 mm
Infill: 30–50%
Support: Only if necessary
Note:
This design is provided for free. Use at your own risk.
TrueRC and HDZero are trademarks of their respective owners and are not affiliated with this project.

Description (German):
This adapter was specifically designed to securely and precisely attach the TrueRC X² Air 5.8 MK II antenna to HDZero Goggles.
It ensures stable mounting, optimal alignment, and prevents the antenna from unintentionally rotating.
Suitable for HDZero Goggle
Compatible with TrueRC X² Air 5.8 MK II
Stable fit and easy installation
Optimized for 3D printing
Requires M2 screws and M2 heat-set inserts for fastening
Print recommendations:
Material: PETG or ABS (for better heat resistance)
Layer height: 0.2 mm
Infill: 30–50%
Support: Only if necessary
Note:
This design is provided for free. Use at your own risk.
TrueRC and HDZero are registered trademarks of their respective owners and are not affiliated with this project.