Somfy Connexoon RTS holder - Free 3D Print Model

Search models, users, collections, and posts

RynoRC

Household>Other House Models

IP Report

Print Profile(1)

All

P1S

P1P

H2D

X1E

X1 Carbon

A1 mini

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 6 walls, 25% infill

Designer

46 min

1 plate

4.3(3)

Open in Bambu Studio

Boost

Released

Description

Holder for a Somfy Connexoon RTS gateway to hold it vertically.

You can attach it with double sided tape or there are 2 screw holes.

There is ample room to access all the ports and buttons once in the holder.

If printing PLA I suggest opening the 3D printer lid so it doesn't get too hot and warp.

Add a brim if adhesion is an issue.

Comment & Rating (4)

@VinPrints

Print Profile

0.2mm layer, 6 walls, 25% infill

@EnemyNL

not bad, but I'd change two things: 1). enlarge the holes which tot screw through. they now didn't fit my screwdriver nor my cordless drill screw bit. 2) put a little lip or something on the side, cause the connexxoon could now slide out sideways (it won't fall, because of the cables, but I'd prefer is too remain exactly in place)