Icy_Churros

bbear3D

cover

02J Bellhousing Plug Bottom.jpg

02J Bellhousing Plug Installed.jpg

02J Bellhousing Plug Side.jpg

02J Bellhousing Plug Top.jpg

plate_1.png

2025-08-08_d948046372b76.jpg

Supports are needed to get a good quality print.  If you have a multi-nozzle printer, I recommend increasing the support usage to the whole bottom side of the main section, and using a support material to get the best print quality.  You can increase support usage and still use TPU for supports, but you&#39;ll be getting marginally better print quality for much more difficult to remove supports.  Since the underside is not visible once installed, I don&#39;t think it&#39;s worth the hassle of trying to get the best quality supports.&nbsp;The TPU profile in the .3mf has been modified to get more consistent print quality with Bambu TPU 95A HF.

0.2mm layer, 5 walls, 15% infill

This is a reproduction of VAG 02A301115A/02A301115B, and fits any VAG 02A or 02J transmission with a TDC hole in the bellhousing.  Use it if yours is missing or damaged (mine was missing).  It is a snug fit, and should be printed in TPU in order to have enough flexibility to be installed and removed.

VW 02J/02A TDC Hole Plug (02A301115A / 02A301115B)

ASIA

Print Profile(1)

Description

Comment & Rating (1)

License

Related Models