natthecat

cover

IMG_7723.jpeg

IMG_7718.jpeg

IMG_7719.jpeg

IMG_7717.jpeg

plate_1.png

plate_2.png

2025-08-08_ac6d333ac9878.jpeg

To print both parts, I used a 0.6 nozzle and it took around 3.6 hours (0.24mm Optimal @BBL A1 0.6 nozzle). The stem and base fit super snugly, so just pop the stem into the base!

0.2mm layer, 2 walls, 15% infill

M&M20

IMG_4378.jpeg

IMG_4379.jpeg

Strength-tuned for extra sturdiness:<ul><li>4 wall loops for a sturdier stem and base</li><li>0.20mm layer height for better layer adhesion</li><li>40% gyroid infill on stem, 30% adaptive cubic on base</li><li>Infill-wall overlap increased to 25%</li><li>Outer wall speed 150mm/s, inner wall speed 180mm/s</li><li>5 top/bottom shell layers for a stiffer base</li><li>Normal support painted on hook overhang</li><li>Holds 3+ lbs of bananas with no flex</li><li>Textured PEI plate, single color PLA</li><li>Print time: ~4h (vs ~2h24m stock profile)</li></ul>

Extra sturdy: 4 walls, 40% infill stem, 0.20mm layers

https://www.printables.com/model/752524-banana-stand

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Thank you ٩(๑❛ᴗ❛๑)۶</boostcontent></boostme>I added a little tray on the stand’s base for candies and snacks. I adore the original stand, but I also wanted a cute little pocket or storage spot for those tiny treats like candies or some small fruit, which is why I decided to remix it!

Japandi banana stand

ASIA

Print Profile(2)

Description

Comment & Rating (130)

This remix is based on

License

Related Models