Print Profile(1)
Description
Mount for the Bose ‘TV Speaker’ soundbar, designed to attach between the wall mounting brackets and the TV. (no additional holes in the wall required)
Please print the test part to make sure it will fit your soundbar before printing!
If the grooves don't line up on your soundbar, but the holes do, you can try the “no grooves” version.
The mounting holes on the back are spaced at 200mm, 100mm, 75mm and 50mm which should support most TVs / monitors under 55". Some larger TVs also use the 200mm, but check before you print!
Used M5 screws to attach the soundbar to the mount.
This is designed to print without supports.
Note: the test print is designed to verify if your printer can handle the overhangs and bridging without support, as well as the fit for your soundbar.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)