Klendathu+Hueforge

Klendathu/JP Mashup

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 226x226mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm

The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

Filaments Used:

PLA BambuLab Basi Black Transmission Distance: 0.3

PLA BambuLab Basic Red Transmission Distance: 3.6

 PLA BambuLab Basic Yellow Transmission Distance: 6.4

 PLA BambuLab Jade White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #6 (0.56mm) swap to Red

At layer #12 (1.04mm) swap to Yellow

At layer #18 (1.52mm) swap to White for the rest.

You can scale up or down, just remember to uncheck universal scale.

I print 295 x 295 on H2D  and

226 x 226 on X1C

No Prime Tower