Customizable Automotive Hole Caps/Plugs
Print Profile(1)
Bill of Materials
Description
Caps/Plugs for holes as small as 3 mm to as large as 202 mm. Made these to plug ac lines to stop dust and debris from getting in. I based them off of the caps that come with a bunch of different car parts.
STACKABLE!!! FULLY CUSTOMIZABLE!!!
Simply enter the hole size and it'll make a cap that fits holes +-2mm of the given size.
Need a longer or shorter cap?
You can set custom heights for the cap. Same goes for the diameter of the base.
Need a 200mm base for some reason on a 5 mm cap?
Go ahead, you can do that.
Just note that the minimum base diameter will always be 1mm more than the largest diameter of a cap.
So a 5mm cap has a 7mm max → 8mm base diameter minimum
You can also use it inverted by setting hole size to 1mm more than the external diameter.
If you need a better fit I would recommend printing them out of TPU, but PLA works just fine for keeping debris out.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)