Search models, users, collections, and posts
Playing/Collection Cards Book Case (Parametric)
IP Report
Print Profile(1)
blank, 0.2mm layer, 5 bottom walls, 15% gyroid infill
Designer
2.1 h
1 plate
Open in Bambu Studio
Boost
151
518
14
0
243
110
Released
Bill of Materials
Description
A parametric playing/collection cards case that closes on itself like a book.
- Print-in-place design (no assembly required).
- No excessive overhangs (max. 35° on conical hinge pins and max. 45° hinge knuckles).
- Easy multi-color printing with a minimum number of filament swaps.
- Optional magnet holds (recommanded if you plan to store the case vertically).
- Last-card cutout, picker aid.
- Cover lid to prevent the first card from slipping out too easily.
What can you change?
This model is fully parametric. Download the Fusion 360 design file, open it, then go to Solid → Modify → Change Parameters to customize any value, so you can fit any card and deck size you like. Some values may require further adjustements to the model.
Interresting parameters shortlist
| Parameter | Default Value | Description |
| card_width | 64 mm | Width of a single card |
| card_height | 89 mm | Height of a single card |
| card_clearance | 2 mm | Extra clearance around each card (avoids a “too perfect” fit) |
| deck_height | 25 mm | Total height of the stacked cards (you may need to change the picker_* parameters if you change this to high or low values). |
| deck_clearance | 5 mm | Extra clearance above the deck (ensures the cover closes smoothly, but may allow to the cards to move inside the case) |
| cover_thickness | 5 mm | Thickness of the cover (affects hinge dimensions) |
| cover_padding | 5 mm | Padding between the cover edges and the cards box |
| magnet_* | Various holes/tolerances for magnet inserts (may require adjustments to cover parameters) |
Magnets
The model includes two magnet holes to help keep the case closed:
- Cover: Ø 3 mm x 1 mm
- Case: Ø 3 mm x 2 mm
A tip of glue or fine-tuning the magnet_tolerance parameter might help.
Coloring
The design of the case is made to be easily colored using height coloring (manual color swap friendly).
License
This user content is licensed under a
Creative Commons Attribution
Comment & Rating (14)