Flakpanzer 341 Anti aircraft Tank Panther 1:35 - Free 3D Print Model

Search models, users, collections, and posts

Bavaria_3D Tanks

Toys & Games>Construction Sets

IP Report

Print Profile(2)

All

A1 mini

X1 Carbon

H2D Pro

H2C

P2S

P1P

H2D

H2S

X1E

P1S

X2D

A2L

0.16mm layer, 2 walls, 5% infill

Designer

16 h

4 plates

5.0(37)

0.2mm layer, 2 walls, 15% infill

30 h

6 plates

Open in Bambu Studio

Boost

1223

2322

157

1.1 k

261

Released

Bill of Materials

Bambu Filaments

Select all

PLA Basic

PLA Matte

Description

If you enjoy my work, consider supporting me ❤️ ❤️ ❤️
Buy Me a Coffee: buymeacoffee.com/bavaria3 | Ko-fi: https://ko-fi.com/bavaria3

Boost Me (for free)

Don’t miss out — follow me for more top-quality tank models!

All models are designed from scratch in Fusion 360 and validated through real prints using my own equipment, with no AI involved. Each design is tested and refined through multiple iterations to ensure reliability and real-world usability.

If you like my work, feel free to like, save, and share your thoughts in the comments — your feedback directly helps improve future designs.

================================

📋 Recommended Print Settings (For Best Results)

Filament: PLA. Different materials have different shrink rates, so using other filaments might cause fitting issues or dimensional errors during assembly.
Slicer: Bambu Studio. I recommend using my default profile — I’ve tuned it specifically for this model.
Ambient Temperature: If you’re using an open-frame printer like the A1 or A1 Mini, keep your room above 20°C (68°F) to prevent warping.
Print Bed Preparation: Wash with soap and water, then dry thoroughly to ensure good adhesion. For small parts, apply a glue stick for better bed adhesion.

🔧 Assembly Diagram Notes

You’ll need super glue to attach all the components together. This is an early build of mine, so all the wheels need to be glued in place.

I designed two small springs to be placed inside the turret for locking the barrel. This allows it to move while providing sufficient friction to hold it in place. I made the corresponding edits in Bambu Studio and configured the surface of the barrel that contacts the spring as a hollow mesh to increase friction.

This is the rangefinder. Please ensure it is installed in the correct position.

The Panther Medium Tank’s running gear uses a complex interleaved road-wheel mechanism, below are the installation procedures for these assemblies:

The 6 plates are the heat-dissipation mesh, I use Bambu Lab’s software to set the top shell thickness to 0, choose “Grid” for the infill pattern, and set the infill density to 50%—this will simulate the mesh effect.

================================

Boost Me (for free)

If you like my work, consider leaving a boost — it really helps me keep creating more exciting models!

Membership

A lot of you have asked about selling prints of my models. If you want to use my designs commercially, just sign up for the commercial license membership — you can click this box to subscribe directly.

Join

Documentation (1)

Assembly Guide (1)

Picsew_20250729163510.jpeg

Comment & Rating (89)

@H.Arens

Boosted

Pinned by Designer

Print Profile

0.16mm layer, 2 walls, 5% infill

I had a lot of fun printing and assembling it I wish you could also make a Leopard 2 A7V Otherwise excellent work please keep it up

Show original

@user_4049379670

good model!

@King_Enzo2013

Boosted

the guns are upside down

@jbrally

Boosted

I already have the turret painted for now

Show original

@jbrally

Boosted

I keep moving forward

Show original

@raul_3418252660

Print Profile

0.16mm layer, 2 walls, 5% infill

what a wonderful model. so easy and intuitive. very easy to assemble. too bad i can't boost you again, due to the limit per year, which sucks. @makerworld, can we pls lift this restriction? i'm going to print all his models, its only fair that i should be able to boost each and single one of them.

@evojang

I'm continuing to collect your models. The filament I used is eSUN eSilk Silver. Thank you.

@McCanic

I used to make tanks for Mikolaj. Frankly, I don't know if this is the right place to discuss this, but I've always had problems printing and assembling the parts. Bavaria's tanks always print flawlessly, and they're perfect when assembled. You won't make mistakes because they're designed with precautions to avoid mistakes. Excellent details, excellent print quality, and a true tanker. Thank goodness you exist, Bavaria. Note: I placed a panther tank turret on the flankpanzer hull.

The designer has replied

@Bavaria_3DTanks

Thanks, I’m glad to hear that

@ShevaCZE

Print Profile

0.16mm layer, 2 walls, 5% infill

very nice model

The profile uploader has replied

@Bavaria_3DTanks

Very nice!

@user_2365264404

Very nice model, very good print and relaxed assembly! Thank you for your excellent work. Model shown as a prototype, without chain guard

Show original

@3DGearZone

Print Profile

0.16mm layer, 2 walls, 5% infill

Such an excellent model! My son loves your work and we have now printed a ton of prints over the past 2 months.

@ElRobotX

Print Profile

0.16mm layer, 2 walls, 5% infill

Another great model!

@alexagostini98

Boosted

Print Profile

0.16mm layer, 2 walls, 5% infill

I think this is a most beautiful model that I’ve printed! Detail level are awesome and the instruction for assembly it is perfect. I suggest all to print it!

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.