DICE - 10 Step Puzzlebox | 2 Variations to choose! - Free 3D Print Model

Search models, users, collections, and posts

2222pzzls

Toys & Games>Puzzles

IP Report

Print Profile(2)

All

A1 mini

H2S

H2C

P1P

P2S

H2D

P1S

X1 Carbon

H2D Pro

X1E

X2D

A2L

Woodgrain Pattern

Designer

6.1 h

4 plates

4.8(45)

Normal Dice (No Woodgrain Pattern)

Designer

5.7 h

4 plates

4.8(44)

Open in Bambu Studio

Boost

526

1513

155

972

605

Released

Description

NOTE!

ALSO AVAILABLE WITH WOODGRAIN!

Unlock the Mystery – The DICE Puzzle Box!

Step into the world of adventure with this DICE INSPIRED 3D-printed puzzle box, crafted in the shape of a classic dice. At first glance, it’s just a cube—but hidden within lies a secret compartment, protected by 10 intricate and concealed steps that challenge your wit and patience.

Measuring 7x7x7 cm, this box features a realistic wood grain texture (or without) that evokes the feel of ancient artifacts and forgotten treasures. Despite its complexity, it’s easy to print and assemble, thanks to the detailed step-by-step guide included. No AMS required. No extra parts needed. Just print, build, and begin your journey!

Whether you're a puzzle enthusiast or a seeker of mystery, this box invites you to unlock its secrets. Are you ready to play?

"Roll the dice. Unlock the secret. Dare to discover."

Do you like my puzzles? Please consider a (small) donation. Every contribution helps me keep experimenting, designing, and releasing new puzzles for everyone to enjoy at no cost. Thank you so much.

You can also:

Boost Me (for free)

I spend a lot of time crafting these intricate puzzleboxes for the community. Please enjoy my puzzleboxes for free, but consider to BOOST so I can create more for you.

Attention:
This model contains moving parts and relies on tight tolerances. It is strongly recommended to print using a relatively new or well-maintained nozzle. Worn or heavily used nozzles may result in inaccurate prints, which can cause parts to fuse together or fail to meet the required tolerances. This may prevent components from moving correctly or cause them to become stuck.

BAMBULAB Filament is highly recommended! Other brands like Elegoo give very bad results in tolerances (which causes fitting issues!)

Membership

Looking for a commercial license? Check out the membership options I offer for commercial licensing! Disclaimer: I currently only sell "OFFLINE" commercial licenses via membership (for example selling on fairs and markets). Online commercial licenses (for like ETSY or other online platforms) are only available for bigger puzzleshops (contact me for more info).

Join

Documentation (1)

Assembly Guide (1)

Jumanji Puzzlebox (Parts and Assembly Guide) V2.pdf

Comment & Rating (155)

@Patonka

Boosted

Print Profile

Woodgrain Pattern

Love it! is it possible to add a little stand to display the dice on one of it’s corners?

The profile uploader has replied

@2222pzzls

Thank you very much 🙏 I really like the idea of a stand 😃I will try to add it in the near future. Right now working very hard on 3 New puzzles / puzzleboxes

(Edited)

@Cassiope34

@Patonka Searching for "Rubik's Cube stand" yields some interesting results... https://makerworld.com/fr/models/204497-atlas-rubik-cube-holder?from=search#profileId-224684 https://makerworld.com/fr/models/594161-rubixcube-stand?from=search#profileId-515998 https://makerworld.com/fr/models/580480-mini-rubiks-cube-stand-holder-for-30x30mm-cube?from=search#profileId-501380 etc...!

(Edited)

@Patonka

Boosted

Replying to @Cassiope34 :

Thank you good idea

Show original

@user_645795568

Hello 2222pzzls. The cube is really good! Thanks for sharing. I have revised two parts, and now the slider locks in the middle position. This makes solving the puzzle even more challenging. I wanted to send you the print files, but I don't have the right to send you a private message. If you are interested in them, please contact me

The designer has replied

Show original

@2222pzzls

thank you for your kind words! What exactly did you change to the slider? only the round extrusion, so it falls in the hole? Is it still movable then? since I guess you need to press the slider in now?

@user_645795568

Replying to @2222pzzls :

Yes, I curved the slider so it acts like a spring and pushes the new 1mm extrusion into the hole I made the indentation on the cube side with the 5 1mm shallower so the new extrusion doesn't stand out The slider now consists of 2 parts, the spring must be printed vertically Unfortunately, I cannot provide you with the STL or Fusion file this way I have attached an image from Fusion I would be happy to send you the STL or Fusion file I find your puzzles excellent

Show original

@2222pzzls

Replying to @user_645795568 :

I see! clever 👍 I can design (alter) the parts myself based on your description. First I’m working on another few puzzles. but then I will look into changing this base design. Thanks for sharing 🙏

@Kubus3D

Boosted

Super 👍

The designer has replied

@2222pzzls

thanks for your comment! looks great in gold! is that PLA Silk?

@Kubus3D

Boosted

@Kubus3D

Boosted

Replying to @2222pzzls :

@Cassiope34

@2222pzzls Absolutely fantastic! Brilliant! But it's true that side 5 doesn't stop at the center...

(Edited)

The designer has replied

@2222pzzls

Thank you very much! What do you mean by 5 stop at the center? The slider should go to “the center” but there is an extra step with the whole panel. It need to slide up a bit before the middle dot can slide

@Cassiope34

Replying to @2222pzzls :

Ah yes ! exact.

@msanch2

Print Profile

Woodgrain Pattern

Great print. Sunlu pla coffee brown and Sunlu pla gold.

(Edited)

@AnonymOus63

Boosted

Print Profile

Woodgrain Pattern

another very clever design. well done, easy to print. didnt have too much issue with supports. just printed the false dot face up with supports to have the same finish. result is very very nice keep going your good work

@lordodracir

Print Profile

Normal Dice (No Woodgrain Pattern)

You are recommend to use a dark, opaque filament for the shell, as it otherwise gives an important clue out. Adored the concept. The slider is however slightly too lose and you can unintentionally solve it if the die orientation happens to be correct.

The profile uploader has replied

@2222pzzls

man! That’s awesome 🙌 So many prints of my designs 😇 I’m honored

@TinkerMaker

This is an excellent setup. I enlarged it for my project need by 200% (tangelo in pic for scale lol). Only issues I had were my own. My printer had issue with excessive vibration due to its location/base. So it skewed things a bit. Also in case it might help someone else, I found that if you angled the sides at same 150 degrees it added very little supports and printed faster as a result. Naturally it depends on your printer, settings, etc. One thing of note is if you do that make sure the guide rails run vertical (build plate up) instead of side to side (horizontal). Had a side warp doing it side to side when angled. Again this is a great file and design!

The designer has replied

@2222pzzls

thank you so much 🙏

@cemurdock

Print Profile

Normal Dice (No Woodgrain Pattern)

Looks and works great. I just needed to make sure all the supports were fully removed, even the tiny pieces like the small squiggle that connects them. Once everything was removed it worked perfectly. I might suggest numbering the matching sides or designing it so only the correct sides can fit, since a few were very close and almost got stuck at one point. Either way, I still love it and feel it absolutely deserves five stars

@snow1881

Thank you so much for this! I didn't understand what I was doing wrong and it was the squiggles!

(Edited)

@user_3133803831

Note: My English is poor. To 2222 Puzzles: This puzzle is fantastic and fun. I scaled the slider down to 94% because I needed to print it small. Also, I split the body to reduce support. If you don't mind, could you make an improved version of this puzzle? I'm thinking of one with just under 20 moves and all six sides moving (see photo; this should be possible without changing the outer structure or the direction of the grooves).

The designer has replied

@2222pzzls

note back: Your English is fine (and im Dutch, so mine is not well either lol) Thank you so much for your input! I will definitely place this on my backlog for a possible sequal: DICE 2. 🙏

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.