Print Profile(1)
Bill of Materials
Description
KeyFold - Keys in Perfect Order
Boost Me (for free)
Before you proceed, remember that my work is completely free, a boost helps me continue to publish new models!
Say goodbye to messy keychains, this fantastic model allows you to perfectly organize your keys!
Only 30 minutes of printing and 2 3mm screws
No special printing precautions are needed, mine were printed in PLA and of course, the more durable the material you use, the more resistant and long-lasting the model will be
The length of the screws you choose will affect the number of keys it can hold, below is a guideline to help you decide which screws to use (the measurements are approximate and based on keys with a thickness of about 2/2.3mm, the values reported may differ depending on your type of keys):
10mm screw - 2 keys
12mm screw - 2/4 keys
14mm screw - 4/6 keys
16mm screw - 6/8 keys
18mm screw - 8/10 keys
20mm screw - 10/12 keys
25mm screw - 14/16 keys
30mm screw - 18/20 keys
The screws are very common 3mm screws with nuts, you can find them in any hardware store or DIY shop!
Assembly is quick and easy, just insert the nuts into the slots and the screws, you can't go wrong!
Don't forget to use the BOM below if you want to buy the screws from the Bambu Lab store!
Print and have fun!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (152)