Ventilation Duct Outlet for Sliding Window Tracks

3D-Printed Ventilation Duct Outlet for Sliding Window Tracks

A 3D-printed ventilation duct outlet specifically designed for sliding window tracks, enabling efficient exhaust without the need for drilling holes. After installation, you can easily seal the lower space with plastic sheets or films to prevent air backflow.

Notes:

• The model was created using OrcaSlicer. When converting to Bambu Lab printers, some parameters may differ. If you're using OrcaSlicer, you can download the original OrcaSlicer file from the video description on the webpage.
• The model configuration includes two versions. The first version is a single-piece design; print this one if you have no additional requirements. The second version requires embedding 3M magnetic strips, but its connection strength is insufficient, so it's not recommended for printing! (Perhaps the model could be modified to add a slot for better functionality.)
• The model is designed for size 80 aluminum foil ducts. If your duct size differs, measure the dimensions with a vernier caliper, then adjust the exhaust outlet size before printing.
• PETG is recommended for printing.
• Turbo Mode can be used to increase printing speed.