Base for JP Performance R34

Base for the JP Performance R34. With it, you can display your Kraemo R34 (e.g.,
in your display case) at an angle.

To attach, simply snap the double nub on the underside into the screw holes of the camber adjustment screw.

It's best to print the base on the surface where the car will later be attached.
Essentially upside down. Designed in two parts so that printing and assembly are as
easy as possible. If necessary, a few strategically (carefully) placed
double-sided adhesive strips can help.

The shorter arm of the double nub then fixes the rear axle and the longer one the front axle.

It is recommended to print the entire thing in 0.20mm QUALITY, but draft also works for those in a hurry.

If the base is too high for you, you can always cut off a bit at the bottom in the slicer.
You can also mirror the base, then the car will stand crooked in the other direction.

For future models, there will also be a corresponding base, once I get my hands on them.

I haven't bought the car myself, but thanks to the dimensions being sent to me, I can now also provide the base.

Feel free to ask me any questions.