Charmander Evolution Line 2D Hueforge

Print at 100% infill with a layer height of 0.16mm with a base layer of 0.32mm

The Model is 142.86x200mm in size
You may print at higher layer heights below the Base Thickness of 2.56mm
The Max allowed Thickness is 4.32mm and the Actual Thickness is 3.84mm

Filaments Used:
    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
    #ff9016 PLA BambuLab Basic Pumpkin Orange  Transmission Distance: 5.5
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #16 (2.72mm) swap to Red
    At layer #18 (3.04mm) swap to Pumpkin Orange
    At layer #21 (3.52mm) swap to Jade White for the rest.
 

You can scale the design however you want but the Z value needs to stay at 3.84 or it will mess up the layer heights.