V0.2 Annex K3 Style Door

B.O.M

4x - SHCS M3x12mm
2x - BHCS M3x25mm
8x - BHCS M3x10mm
2x - BHCS M5x40mm
2x - M5 Nylock Nuts
4x - 6mm OD x 3mm L Magnets
8x - ‘Voron’ Style Heat Set Inserts
4x - F695ZZ Flanged Ball Bearing*
350x230x5mm Acrylic Panel
~1.5m 15x3mm Foam Tape
 

* Mine carry that name, however according to spec they're supposed to be 5mm ID, in practice they're 6mm so I tapped ‘Hinge_C_1515’ with an M6 tap and used 4x BHCS M6x12mm. The important thing is (for the bearings) to have them 12mm OD x 4 mm H and the ID can be 5 or 6 as long as it's compatible with your screw of choice.