3.5" HDD adapter for two 2.5" HDD - Free 3D Print Model

Search models, users, collections, and posts

techam

Hobby & DIY>Electronics

IP Report

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 3 walls, 15% infill

Designer

2.4 h

1 plate

4.8(21)

0.2mm layer, 6 walls, 25% infill

2.8 h

1 plate

5.0(7)

Open in Bambu Studio

Boost

245

401

228

Released

Description

Summary

This adapter allows you to mount two 7mm slim 2.5" HDD or SSD drives in a 3.5" Slot.

The adapter has mounting points on the top and sides with the same spacing as 3.5" drives have.
Also there are holes with 30mm spacing as floppy disk drives use them.

The holes should fit for M3 Screws, to be screwed directly into the plastic.

For the 2.5" Drives you need four M3x12mm Allen screws.

Have fun.

Comment & Rating (32)

@BTo900

Print Profile

0.2mm layer, 3 walls, 15% infill

Worked like a charm, printed in cheapo PETG, and everything went great.

(Edited)

@user_2231537746

Print Profile

0.2mm layer, 3 walls, 15% infill

I give you 4 stars cuz hdd does not fit

@woopwoop536

Print Profile

0.2mm layer, 3 walls, 15% infill

make sure the 2.5 drive isn't the thick ones. mine was the slim ones so it fit with no problems

(Edited)

The profile uploader has replied

@techam

yes, it's designed for the newer 7mm 2.5" drives, the older 9mm wont fit.

@stefansitt

Print Profile

0.2mm layer, 3 walls, 15% infill

Adaptor not full length of 3,5" bay. Too short to be mounted in some cases.

@inorishizuka

then find one that works in a longer bay slot, majority of systems I service use this format.

@user_1335101651

Fits perfect .. Thank you :)

@Westnq

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill

worked great for a quick drop-in upgrade on one of the workstations at work. Nice!

@Westnq

Boosted

Didn't have to run a tap through the mounting holes or anything, just perfectly sized holes. Saved me in a critical moment of upgrading a work computer. Thanks guy(or gal)!