Ravens/Crows Fear Tracker for Daggerheart

A Fear Tracker for Daggerheart without gore or being too grim is what I wanted but couldn't find - so I designed it myself! 
Some nice Ravens to represent Fear as the flock starts to gather for the impending doom on the party!

Sculpted in Nomad Sculpts on iPad, this is my first sculpting project so if you come across any issues, let me know!
 

Includes the following files:

Tracker base with branches:

• Fear Branches (.stl)
• Contains 6 pockets for 3x1mm magnets, each 20 mm apart
• Length, width and height are 130 x 10 x 22 mm, including branch protrusions 150 x 25 x 30 mm
• It can sit on top of a GM screen or stand on its own
• Can sit on a DM screen up to 6 mm width, which is quite large for many but consider lining the inside with felt to protect your screens!
• Print 2 to be able to place a total of 12 ravens - I recommend printing 1 normal and 1 mirrored for variety
• NOTE: I printed these on their side, branches on top, which gave the branches some nice texture with a 0.4mm nozzle

Raven/Crow models:

• RavenSitTurn, RavenSitStraight, RavenSitOpen, RavenHunchStraight, RavenHunchOpen and RavenHunchWings (.stl)
• Contain a pocket on the bottom for 3x1mm magnets
• Sizes vary between 14-22 mm length, 22-30mm width, and 15-18 mm height
• 6 individual models with 2 base positions (Sit or Hunch) and 3 different poses per position
• Print 2 per model to place a total of 12 ravens - you can also print 1 of each model mirrored for truly unique ravens!
• NOTE: I printed these with resin - have not tested printing with PLA yet

Raven/Crow storage box:

• RavenBoxBot and RavenBoxLid (.stl)
• Contain 4 pockets each for 6x1mm magnets, so the box will stay safely closed during travel 
• RavenBoxBot: outer length x width x height are 84 x 44 x 40 mm, 2 mm walls (inside is 80 x 40 x 38)
• RavenBoxLid: base outer length x width x height  are 89 x 49 x 42 mm, 2 mm walls (inside 85 x 45 x 40)
  • NOTE: including raven logo the outer width is 51.5 mm