Ai Hydra Edge 44 shade

This is a shade for Aquaillumination's Hydra Edge 44 light fixture. This is meant to be print as a whole due to thin walls made to keep the weight of the shade down. A split version is uploaded if you have a smaller print surface. I found the best way to connect the split version after printing is to take some scrap print I had in the trash from a failed print that is no more than 3mm thick and glue it across the seam on the inside of the light. If you get any discoloration from the glue that bleeds through to the visible part of the shade, black sharpie fills it in. The shade goes on one side of the light and moved toward the mounting arm, then the other side of the shade will be able to get moved over the light. Once over, it is a vertical drop over the light and a snug fit getting over the mounting screws. You will have to adjust the power cord so it exits the shade through the side cut out.