Aquatic Dragon – with printed eyes or glass eyes! - Free 3D Print Model

Search models, users, collections, and posts

Insectium3D

Toys & Games>Other Toys & Games

IP Report

Print Profile(5)

All

A1 mini

X1 Carbon

P1S

P1P

H2D

X1E

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 10% infill

Designer

4.8 h

1 plate

4.8(16)

0.2mm layer, 2 walls, 10% infill

Designer

8.9 h

1 plate

5.0(8)

0.2mm layer, 2 walls, 10% infill

Designer

4.8 h

1 plate

4.6(13)

0.2mm layer, 2 walls, 10% infill

Designer

9.8 h

1 plate

5.0(2)

Click to see more

Open in Bambu Studio

Boost

477

1073

868

531

Released

Description

Aquatic Dragon – with printed eyes or glass eyes!

Want me to upload more free designs? Give it a boost then!

See my other articulated designs here

Membership

Want to sell this design or any others I've created? Join the Commercial License tier! 🤩

Join

Easy and quick to print: Ready to print directly!
100% is a total length of 435mm and can be printed on A1 MINI!
Scaling up is no problem!
Available with either printed eyes or glass eyes - 100% scale fits 6mm eyes

Pre-painted versions included, whether with printed eyes or glass eyes.

Available with either printed eyes or glass eyes – may vary depending on your settings, so it's recommended to test print just the head first.
Sizes at 0.2mm layer height:
6mm = 100%
8mm = 133%
10mm = 164%

Let me know if you need any further adjustments!

Have fun printing and don't forget to share your prints!!

Like the design?

Show it some love and give it a boost!

Boost Me (for free)

Want me to upload more free designs?
Give it a boost then! Your support means a lot!

Let me know if you need any further adjustments!

Have fun printing and don't forget to share your prints!!

Like the design?

Show it some love and give it a boost!

Boost Me (for free)

Want me to upload more free designs? Give it a boost then! Your support means a lot!

Check out my other designs, including dragons, stingrays, and more here!

Recommended printing settings:

Wall: 3
Layer Height: 0.2 mm
Infill: 5-15% gyroid or similar infill
Support: Not needed
Brim: Use 5mm mouse-ear if needed

print in place animal

print in place articulated

print in place dragon

dragon print in place

Comment & Rating (56)

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.