Universal_Car_Tablet_Holder - Free 3D Print Model

Search models, users, collections, and posts

CraftSphereXO

Hobby & DIY>Vehicles

IP Report

Print Profile(2)

All

P2S

X1 Carbon

H2D Pro

H2D

P1P

X2D

P1S

H2C

H2S

X1E

A2L

0.2mm layer, 4 walls, 15% infill

Designer

3.1 h

1 plate

4.6(12)

0.2mm layer, 4 walls, 10% infill

Designer

3.3 h

1 plate

5.0(2)

Open in Bambu Studio

Boost

215

658

614

274

Released

Description

Content has been automatically translated.

Show original

A tablet holder for car headrests

maximum diameter of headrest bars 16mm

Tablet dimensions: 21cm to 31cm width

max 15mm thick

height is limited by the car :-)

The first assembly is a bit more difficult, it probably won't be adjusted often either

Second variant (pictures in green) features a clasp so the headrests do not have to be completely pulled out during assembly

Comment & Rating (29)

@user_190210469

confused why it says 3.3 hours and mines on 100% speed at 5.14 hours at 9%, is this designed for high speed printing?

(Edited)

The designer has replied

@user_454829259

That is indeed confusing I will check if something went wrong during the upload And test the print myself It is still displayed to me as 3.3 h

Show original

@Variablenote

Print Profile

0.2mm layer, 4 walls, 15% infill

Worked well-used zip ties to secure it fully as it didn't fit our car

(Edited)

The profile uploader has replied

@user_454829259

Thanks for the information. If you can tell me the car, I'll adapt it so that it becomes more universal

@Variablenote

Replying to @user_454829259 :

25 Chevy trailblazer headrests do not come off unfortunately, but it did work in my honda just fine

@user_454829259

Replying to @Variablenote :

Perfect. Thanks, then I'll try to develop an open variant

@bluppylein

I have tried several print settings and even used my best plate for adhesion. I always get spaghetti results on the first layer. Flipping the parts and using adhesion spray do not help either. When flipping the parts, I also noticed that the layers are not recognized cleanly. Could the file be corrupted

The designer has replied

Show original

@user_454829259

I haven't had anything like this before I printed the file directly from MakerWorld for another case and didn't get any errors Is it a Bambu Lab printer Does it not work with the project file and also with the model file

Show original

@user_454829259

You are absolutely right, the file was not okay, one part was floating in the first layer. Thank you for your justified feedback. Best regards

Show original

@creastudio

Boosted

Tablet holds very well. Works better than many other holder models. I use it with an Amazon Kids Tablet

The designer has replied

Show original

@user_454829259

Thank you for your feedback

Show original

@user_461246394

Print Profile

0.2mm layer, 4 walls, 15% infill

only threads

The profile uploader has replied

Show original

@user_454829259

This is already the second one. And indeed, in the first layer, a part was floating. It has now been corrected. Thank you for the justified feedback. Best regards

Show original