Lay-Z-Spa hose adapter

Summary

Hose adapter. You may have same challenge like me, suck out all the little flies and the dust from the ground of your Lay-Z-Spa pool. Simply put this adapter on the filter holder and connect a traditional but short garden hose (2m). Then enjoy time by sucking all the dirt from the ground into the filter. The model fits very tight. If you want an easy remove, you can print with scale to 101-102%.

I noticed, that very small things are not hold back by the original filter. If you want prevent pushing those little things back to the pool, simply put 2 Nylon socks on the water return on the inside of the pool.

This adapter works for Lay-Z-Spa, type Palm Springs, but probably for a lot more.

If you are looking for a vacuum tip, I recommend this Lay-Z Spa vacuum tip (from Erwin). 

The choosen license does not allow any commercial use of this item. I already found some on Ebay. I have shared this item with you for your convenience, but if I seel you selling this online to other people, I will contact that platform and I will also contact a lawyer. I did not expect I have to mention this, but there are always some dumb guys out there...

Print Settings

Printer: 

Bambulab A1 mini

Rafts:                      

No

Supports:                      

No

Resolution:                      

0.2

Infill:                      

30

Filament: Generic PLA+
                        

Notes:                     

print without supports. If you experience adhesion problems, use brim (which is default in the print profile), respect license!