Phantom Pop Pal – Ghost Can Holder Lamp - Free 3D Print Model

Search models, users, collections, and posts

WispHollow

Household>Decor

IP Report

Print Profile(1)

All

P1S

X1 Carbon

X1E

H2D

P1P

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 3% infill

Designer

21.8 h

2 plates

4.9(28)

Open in Bambu Studio

Boost

298

528

542

248

Released

Description

Membership

Want to sell prints of my models? Join my membership to get access to selling Physical Prints of my models.

Join

Boost Me (for free)

If you liked the model, please consider giving it a boost as it helps me to create more models to share with everyone.

👻 Phantom Pop Pal – Ghost Can Holder Lamp

A charming fusion of spooky and functional!

This adorable ghost lamp isn't just hauntingly cute—it's helpful too! Shaped like a friendly phantom with outstretched arms, it securely cradles a standard soda can (or any 12oz drink), doubling as both a quirky can holder and a glowing accent light.

🧾 Perfect for:

Gifting to Halloween lovers
Fun nightstand decor
Desk companions with personality
Holding your favorite soda while you game or chill

This will work with the Bambu light kit as there is a hole in the bottom to set the ghost on the lamp.
This also works well with the color changing light pucks that have remotes. That is what was used when taking the photos.

Comment & Rating (71)

@Tiphony1386

any way you can make this to be holding an Alani sized can?

The designer has replied

@KagaChe

lol was literally thinking the same thing.

@user_4046717467

Boosted

I need one for an Alani can, too!

@Eroch

I third this!

@SteveA

Boosted

Print Profile

0.2mm layer, 2 walls, 3% infill

Very helpful!

The profile uploader has replied

@Namregah

Wow thank you for the sharing the photo. I am not sure what light you used, but it is much brighter than the one I used when I designed it. It really glows with a brighter light. Love it, thanks again for sharing. Thank you so much for the 5-star rating and boost! I appreciate your support.

(Edited)

@SteveA

Boosted

Replying to @Namregah :

I get the LED001 super white from Temu you can get 4 for the same price as 1 from Bambu and they are exactly the same size just brighter. 😁 Nice model though looks great, thanks again.

@Namregah

Replying to @SteveA :

Thanks for sharing the info. I will check it out.

@user_3231547594

Boosted

Print came out amazing, thank you so much!

The designer has replied

@Namregah

Thank you for sharing the photo! It turned out great! lol, the drink fits the theme! Thank you so much for the boost! I appreciate your support.

@user_3390756790

I can’t get it to print right…. Everytime I try to print it it comes out like this and I have to stop the print. I added support and have 3% infill and 3% wall infill. Is there a setting I may have wrong? It has been printing the top half off center for some reason. Using PETG filament.

The designer has replied

@Namregah

Since it printed fine for me and for others, I would think its not the settings if you are using the profile I provided. The profile I provided is for PLA not PETG. I think you have to run the nozzle hotter on PETG, but I am not sure since I dont print with it often. If you look at the bottom of the print, it almost looks like you are getting under extrusion. This could be from a partial clog in the nozzle or it not being hot enough. Try a different print and see if you get similar issues. Also, are you printing this on a Bambu or Creality printer? (I see the Creality logo on the bed). I am not sure how well the profle settings transfer between the two.

@user_3390756790

Replying to @Namregah :

I just upgraded my nozzle to 0.6mm when it was 0.4mm. I did have the AI feature enabled as well but I turned it off. It’s a Creality printer, I think I need to tweak my settings but not sure where to start. I should’ve just left the settings alone lol

@_MatterMade3D

Boosted

Print Profile

0.2mm layer, 2 walls, 3% infill

Apparentky these are all the rage, lol. Several people asking me to make them one, prints easy!

(Edited)

The profile uploader has replied

@Namregah

Turned out great! Thanks for sharing the photo! Thank you so much for the 5-star rating and boost! I appreciate your support.

(Edited)

@mweed42

Boosted

Print Profile

0.2mm layer, 2 walls, 3% infill

Printed scarily without any issues! I don't have a light to go in it, but I have a couple of months to get one!

The profile uploader has replied

@Namregah

Thanks for sharing the photo. It looks great! I used some of those color changing waterproof puck lights off amazon. Thank you so much for the 5-star rating and boost! I appreciate your support.

@bigcat_218

Boosted

Print Profile

0.2mm layer, 2 walls, 3% infill

The profile uploader has replied

@Namregah

Turned out great! Thanks for sharing the photo. Thank you so much for the 5-star rating! I appreciate your support. If you feel it is worth it, boosts are always welcome as well as it helps me to create more.

@user_713615947

Print Profile

0.2mm layer, 2 walls, 3% infill

The profile uploader has replied

@Namregah

Looks great! Thanks for sharing the photo. Thank you so much for the 5-star rating! I appreciate your support. If you feel it is worth it, boosts are always welcome as well as it helps me to create more.

@Sammy_Sonic

can you make one for energy drinks?

@Mal706

Print Profile

0.2mm layer, 2 walls, 3% infill

he has one job and he does it so well

The profile uploader has replied

@Namregah

Thank you so much for the 5-star rating! I appreciate your support. If you feel it is worth it, boosts are always welcome as well as it helps me to create more.

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.