Big-D-SyneS

cover

fidget_spinner_final.jpg

fidget_spinner_edit.jpg

ChatGPT Image Aug 8, 2025, 02_01_58 PM.png

a22bw5.gif

ChatGPT Image Aug 8, 2025, 01_40_54 PM.png

IMG_20250803_031629.jpg

IMG_20250803_031610.jpg

plate_1.png

IMG_20250902_210625.jpg

same great fidget just half the size.

MINI FIDGET 2.5 HOUR PRINT

2025-08-03_bc07dcb2c0e34.jpg

<h3>🖨️ Print Profile Description – Spinning Expanding Star Fidget Toy (Silk PLA)</h3>This print profile is dialed in for smooth, reliable prints of the Spinning Expanding Star Fidget Toy, optimized for silk PLA filament to achieve a glossy finish and fluid movement straight off the bed.✅ Designed for single-piece, no-assembly printing ✅ Supports: Not required ✅ Fully articulated right after print (no post-processing needed)<h3>⚙️ Recommended Print Settings:</h3><ul><li>Material: Silk PLA (or standard PLA for easier first-time prints)</li><li>Layer Height: 0.2 mm</li><li>Wall Line Count: 2</li><li>Top/Bottom Layers: 3</li><li>Infill: 10–15% (Gyroid or Lines recommended – minimal infill required)</li><li>Print Speed: 45–60 mm/s for optimal detail and articulation</li><li>Nozzle Temp: 220–225°C (adjust per your filament brand)</li><li>Bed Temp: 55–60°C</li><li>Cooling: 100% fan after the first few layers</li></ul><h3>🛏️ Bed Adhesion:</h3><ul><li>Brim: Optional – helpful for smaller build plates or drafty environments</li><li>Adhesion Type: Smooth PEI, glass, or glue stick on standard bed</li><li>Bed leveling: Critical for proper articulation – use Z offset tuning if needed</li></ul><h3>🛠️ Tips for Best Results:</h3><ul><li>Use well-tuned retraction settings to avoid stringing between internal gears</li><li>Allow the model to cool fully before removing from the bed to preserve tolerances</li><li>Give the toy a gentle twist and flex after print to loosen up the moving parts</li></ul>Tested on Bambu P1S  with excellent results. Works well on most modern FDM printers with proper calibration.✨Print it, spin it, expand it — and don’t forget to share your make!

OPTIMIZED SIZE 100% STANDS ABOUT 7IN TALL

same great fidget just 125% scale

LARGER SIZE 125%

ChatGPT Image Dec 22, 2025, 09_41_25 PM.png

<h2>🎄 Print Profile – Christmas Edition Expanding Fidget Star (4-Up Vendor Plate)</h2><h3>📦 Model Setup</h3><ul><li>Quantity on Plate: 4 fidget stars</li><li>Orientation: Flat on build plate</li><li>Supports: ❌ None</li><li>Brim/Raft: ❌ None</li></ul><h3>🖨️ Printer Settings</h3><ul><li>Printer Type: Bambu Lab (H2D,H2C,H2S compatible Scale down to fit P1S,X1C,A1)</li><li>Nozzle Size: 0.4 mm</li><li>AMS: Optional (recommended for multi-color Christmas versions)</li></ul><h3>🧵 Filament</h3><ul><li>Material: PLA / PLA+/PLA Silk+</li><li>Brand: Any quality PLA (Bambu Lab, Overture, Hatchbox, etc.)</li><li>Colors:<ul><li>Christmas Red</li><li>Christmas Green</li><li>White</li><li>Gold / Silver (optional accent)</li></ul></li></ul><h3>⚙️ Print Settings</h3><ul><li>Layer Height: 0.20 mm</li><li>Initial Layer Height: 0.20 mm</li><li>Line Width: 0.42 mm</li><li>Wall Loops: 3</li><li>Top Layers: 5</li><li>Bottom Layers: 5</li><li>Infill: 15%</li><li>Infill Pattern: Gyroid</li></ul><h3>🌡️ Temperature</h3><ul><li>Nozzle Temp: 205–215°C (adjust per filament)</li><li>Bed Temp: 55–60°C</li></ul><h3>🚀 Speed</h3><ul><li>Outer Wall: 60 mm/s with silk for the shine</li><li>Inner Wall: 120 mm/s</li><li>Infill: 200 mm/s</li><li>Initial Layer Speed: 30 mm/s</li></ul><h3>🎯 Quality &amp; Reliability</h3><ul><li>Seam Position: Aligned or Rear</li><li>Z-Hop: Enabled (0.2 mm)</li><li>Cooling Fan:<ul><li>0–20% first 2 layers</li><li>100% after layer 3</li></ul></li></ul><h3>🔧 Tolerance &amp; Fit Notes</h3><ul><li>Designed to print in place</li><li>No post-processing required</li><li>If movement feels tight:<ul><li>Slightly increase flow calibration accuracy</li><li>Ensure filament is dry</li></ul></li></ul><h3>🛍️ Vendor Notes</h3><ul><li>Optimized for batch printing</li><li>Durable enough for market handling</li><li>Bright holiday colors attract attention on vendor tables</li><li>Makes a great stocking stuffer / impulse buy</li></ul>

0.2mm layer, 3 walls, 15% infill

WLCTreasures

20260330_151355.jpg

20260330_151412.jpg

20260330_151421.jpg

20260330_111411.jpg

20260330_111445.jpg

20260330_111457(1).gif

20260330_151433(1).gif

Z height only has been reduced by 50%0.2mm layer, 3 walls, 12% infill&nbsp;

Z height only has been reduced by 50% 

3DesignHUB

Screenshot 2026-05-05 110019.png

Screenshot 2026-05-05 110046.png

I&#39;ve optimized the settings to achieve perfect balance between speed and quality! Thank you for th model !

Mini Fidget PLA Speed optimized A1 mini compatible

SuperStar Designs

PXL_20260410_053424351.jpg

PXL_20260410_053424351_(1).jpg

PXL_20260410_053429706.jpg

PXL_20260410_053436154.jpg

PXL_20260410_053437788.jpg

PXL_20260410_053615833.jpg

PXL_20260410_053625046.jpg

PXL_20260410_053632490.jpg

PXL_20260410_053637180.jpg

PXL_20260410_053639872.MACRO_FOCUS.jpg

PXL_20260410_054451606.MP.jpg

I have edited this profile to allow a magnet in the base - and a stronger upright pole / finger stick.Print time on Bambu PLA is 2hr19 - Silk PLA 3Hrs 10Magnet is a 15mm x 3mm round magnet.negative cylinder added ( you can delete if not needed ) if needed don&#39;t move the model or hole will be in wrong place! &nbsp;wall height + initial layer = 0.19Bottom layers 3 Top layers 5Locked ZagCross Zag30% density35% infill on skeleton density ( see last photo )

Stronger pole / Magnetic hole ( deletable with ease ) 

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Boosts it&#39;s a form of thanking the creator. Only in MakerWorld. You get Boosts for free by downloading projects from MakerWorld and printing them using Bambu Slicer. You will receive 1-2 Boosts per week or none at all, decided by the Bambu algorithm. You give them for a project you printed, for a project you like, wherever you want. They are valid for a month from the date of receipt, if you don&#39;t give them to anyone, they will be lost. Consider boosting this fidget!!!!</boostcontent></boostme><h3>🌟 Spinning Expanding Star Fidget Toy – Silk PLA Edition</h3> @@@@ CONSIDER A BOOST IF YOU PRINTED THIS AND LOVED IT!!!@@@@@@&nbsp;Category: Fidget Toy / Mechanical / Articulated Print Tags: fidget, gear toy, expanding star, kinetic, silk PLA, no assembly, single print, 3dprintAdd some shine and satisfying motion to your print collection with this Spinning Expanding Star Fidget Toy – a mesmerizing kinetic model that’s fun to print, smooth to spin, and impossible to put down. while you are playing with this fidget and making some awesome noises make sure you share my design and follow for more.&nbsp;🌀 Design Highlights:<ul><li>Expanding &amp; collapsing star design with spinning action</li><li>Prints fully assembled – no support or glue needed</li><li>Designed for smooth motion right off the bed</li><li>Optimized for silk PLA to enhance the visual effect with its glossy finish</li></ul>🧠 Great for:<ul><li>Fidget lovers</li><li>Stress relief</li><li>Kinetic sculpture fans</li><li>Makers who love cool mechanical prints</li></ul>🖨️ Print Info:<ul><li>Material: Best with Silk PLA (for smooth feel &amp; shine)</li><li>No supports required</li><li>Layer height: 0.2mm recommended</li><li>Print speed: Moderate (45–60mm/s) for clean articulation</li><li>Bed adhesion: Brim optional, but not usually needed with a clean bed</li><li>Test on a tuned printer for best motion</li></ul>💡 Pro Tip: The print tolerances are dialed in for most well-calibrated FDM printers. If your joints are tight post-print, a little light flexing usually loosens them right up.Whether you’re printing for fun, gifting, or showcasing what your printer can do, this expanding star fidget is guaranteed to turn heads and keep hands busy.&nbsp; 📸 Show off your makes! | 💬 Feedback welcome<boostme><boosttitle>Boost Me</boosttitle><boostcontent>THANKS FOR DOWNLOADING MY NEW MODEL PLEASE GIVE ME A LIKE AND A BOOST IF YOU ENJOYED PRINTING THIS.</boostcontent></boostme>

Amazing star fidget**FREE COMERICIAL LICENCE**

Levi Designs

ezgif.com-video-to-gif-converter.gif

IMG_2105.JPG

IMG_2104.JPG

IMG_2102.JPG

IMG_2101.jpg

IMG_2103.JPG

Giant Star fidget

Bardownskiiz

Screenshot 2025-10-08 170030.png

Mini Fidget Star

ASIA

Print Profile(7)

Description

🌟 Spinning Expanding Star Fidget Toy – Silk PLA Edition

Comment & Rating (1301)

License

Remixes (2)

Related Models