Manual Safety Jig for Sig P365
Print Profile(1)
Description
Membership
Sell physical copies by becoming a member
Boost Me (for free)
Or help a brother out with a boost
Sacrificial jig to cut your grip module for a manual safety on the Sig Sauer P365 platform.
Will work on X-Macro grips but you will need to shave down the sides as the X-Macro grip is a tad bit wider than the standard, X, or XL grips. Or you can get something like the Wilson Combat grips that already have a relief cut in the grip to allow for the manual safety.
Use this at your own risk. I take no responsibility for modifications you make to your own firearms.
Tips:
- Recommend that you start with a slower speed on your Dremel and hold it firmly so your bit only contacts what you want it to.
- Print in PETG. PLA will work, but the FCU retention pin is very snug with PLA
- Use the FCU pin to keep it in place
- Insert the front of the jig first, then rotate down to secure with the FCU pin.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (20)