Hueforge Plastic Palms

Dies ist ein Hueforge Vom Cover Palmen aus Plastik.

Viel Spass damit. 

Das Modell kann auf die maximale grösse Skaliert werden.

Nur die X und Y Achse darf Verändert werden!!!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 264.55x264.55mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.59998mm

Filaments Used:
    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #154734 PLA Paramount 3D British Racing Green  Transmission Distance: 3
    #9d2235 PLA BambuLab Basic Maroon Red  Transmission Distance: 1.6
    #e2dedb PLA PolyLite White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to British Racing Green
    At layer #10 (0.88mm) swap to Maroon Red
    At layer #13 (1.12mm) swap to White for the rest.