Anycubic ACE Pro Riser for the Anycubic Kobra S1C

! This is the Full Size Version ! If you want the smaler 2 Tray Version then look here!

The Riser offers a beautiful Option for Elevating your Anycubic Kobra S1 Combo! This Riser offers alot of storage space in the 4 Trays, allows storage for up to 5 build plates and a slot extra for the top window of the Kobra S1 above the storage for the 5 build plates! Thru the Design it also allows for attaching Parts on the left and right side of the Riser for Skadis accessorys!

There are alternative Tray Options for use with the Gridfinity System!

This was printed with Anycubic PLA+ in Pearl Black and Kexcelled matte PLA in cherry red!

The Model you see in the Pictures were the Prototypes! All types of improvements were made to the model to print it nicely and without supports!

! The upper Tray and the Riser Plug Models are in the STL Files Option !

Installation Instructions:

1. Print first the Left and Right side of the Riser
2. Slide the Right side onto the Left side of the Riser
3. Take the 4 screws that were used to secure the inner Parts of the Anycubic Kobra S1 while shipping and screw them into the 4 holes to attach the Anycubic ACE Pro to the Riser
4. Print the upper Tray 2 times (Maybe use other colors to have it more colorful!)(Gridfinity Alternative possible)
5. Print the lower Tray 2 times (Maybe use other colors to have it more colorful!)(Gridfinity Alternative possible)
6. !Optional! Print the The Riser Plug and insert it for stability into the bridge between the lower trays. If you dont want or have the screws to mount the ACE then use the Plug to ensure stability so that the Riser sides dont slide.
7. Insert the upper and lower Trays

I hope it suits your S1 Combo and that you have a great time with the Accessory!

I would be very happy for everyone who makes accessories for this Riser and encourage people to share their Skadis Accessories!