RedDog95

cover

1gangPhoto_(1).png

1gangPhoto.png

3gangPhoto.png

20250801_204814.jpg

20250801_204831.jpg

1000012127.jpg

plate_1.png

2025-08-01_82e276af4bd398.jpg

2gangPhoto.png

0.14 Layer height1 hour print, under 50g per model

Single Gang 0.14mm layer, 2 walls, 10% infill

Double Gang - 0.14mm layer, 2 walls, 10% infill

Triple Gang - 0.14mm layer, 2 walls, 10% infill

1gangPhoto_small Switch.png

Single Gang switch plate for smaller toggle light switches. Standard 1&#34; x 3/8&#34; switch&nbsp;Same printing profile as other covers, different model

Small Switch (single) 0.14mm layer, 2 walls, 10% infill

test fit.png

A quick test fit to make sure this fits over your smaller switch style plates. Uses the same profile settings as the other plates for layer height and infill.&nbsp;Less than 1 gram!&nbsp;This is just for testing! I personally don&#39;t have any of these type of switches, so this is so you can try before you waste filament if the fit is off.

Test Fitter - 0.14mm layer, 2 walls, 10% infill

Wavy light switch plate for standard rectangular light switch.One, two, and three gang plate profiles. &nbsp;Photos printed on Smooth PEI plate, textured PEI plate results may vary.

Wavy light switch plate

ASIA

Print Profile(5)

Description

Comment & Rating (20)

License

Related Models