Fast and Furious Toyota Supra -Large scale model!

Fast and Furious BOMEX Supra - Large Scale Model

Extending on my recently-loaded Toyota Supra Line-up in a smaller scale ( https://makerworld.com/en/models/1646284-toyota-supra-turbo-model-car-set-with-mods#profileId-1740049 )  and as an add-on the my other 200% Street Version of the supra  (https://makerworld.com/en/models/1646405-toyota-supra-turbo-large-scale-car-model#profileId-1740206) here is a larger-scale print of the Fast and the Furious Supra !  (please note at the time of the upload the default wheels are Blitz 03, the replica wheels are in development process and will be made available at a later time) 

This started as a tail-end experiment as I was wrapping up the last of the 16 print profiles of the smaller set of supras and wanted to see how large I could push the p1s and x1c build envelope without splitting up the body. It was meant to be because I could literally get it right to 200%  of the original scale in a one-piece print! 

This model is approximately 300mm (11.8 in) length x 120mm (4.72 in ) width x 80mm (3.14 in ) height: Literally double the size of the smaller scale! 

Please note that you may also need to use a little glue on the wheel/tire depending on your material, as well as a little dab under the exhaust before installing.

The default wheel setup for this model right now are the Blitz 03 wheels (which are a bit similar to the wheels needed for the F&F Supra) which come with the brembo brakes/rotors. The other large-scale SSR Wheels in my other uploads are 100% interchangeable and will work here as well. 

I am in the process of finishing the official wheels, and will work to make sure they also integrate with the brake setup.  

Thank you for visiting my page and taking the time to print my models. Your support is truly appreciated. I never expected to have so many people following me and fueling my passion for creating the models that I create!