Princess Scorpia from She-Ra
Print Profile(1)
Description
Boost Me (for free)
If you like my work please consider giving me a boost
I have added a height range modifier for the initial 0.64mm so the layer heights will be off, however once you slice the .3mf it will look fine as you can see from the pictures.
If you try and slice this directly from the Handy App i think it will revert the 0.04mm layer height to 0.08mm and so it likely wont work.
Project: Scorpia.hfp
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
The Model is 150x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.08mm
Filaments Used:
#000000 PLA Sunlu Meta Black Transmission Distance: 1
#57361c PLA Overture Chocolate Transmission Distance: 0.2
#9d2235 PLA BambuLab Basic Maroon Red Transmission Distance: 1.6
#bb3d43 PLA BambuLab Matte Dark Red Transmission Distance: 1.5
#e8dbb7 PLA BambuLab Matte Desert Tan Transmission Distance: 1
#ffffff PLA+ Sunlu White Transmission Distance: 5
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #13 (0.64mm) swap to Chocolate
At layer #18 (0.84mm) swap to Maroon Red
At layer #24 (1.08mm) swap to Dark Red
At layer #35 (1.52mm) swap to Desert Tan
At layer #39 (1.68mm) swap to White for the rest
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)