Three Ladies on Horseback HueForge with frame

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.76mm

Filaments Used:
    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    #cc7802 PLA BambuLab Basic Gold  Transmission Distance: 2.8
    #d3b7a7 PLA BambuLab Matte Latte Brown  Transmission Distance: 2
    #e7ceb5 PLA BambuLab Basic Beige  Transmission Distance: 8
    #fce300 PLA BambuLab Basic Yellow  Transmission Distance: 6
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 7 unique filaments

Swap Instructions:
    Start with Black
    At layer #6 (0.56mm) swap to Blue Gray
    At layer #8 (0.72mm) swap to Gold
    At layer #11 (0.96mm) swap to Latte Brown
    At layer #13 (1.12mm) swap to Beige
    At layer #15 (1.28mm) swap to Yellow
    At layer #17 (1.44mm) swap to Jade White for the rest.