Old West Street HueForge with frame

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.6mm

Filaments Used:
    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #906b4b PLA BambuLab Matte Caramel  Transmission Distance: 1.5
    #d3b7a7 PLA BambuLab Matte Latte Brown  Transmission Distance: 2
    #56b7e6 PLA BambuLab Matte Sky Blue  Transmission Distance: 1.3
    #d6c7bf PLA BambuLab Matte Bone White  Transmission Distance: 1.7
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 6 unique filaments

Swap Instructions:
    Start with Black
    At layer #6 (0.56mm) swap to Caramel
    At layer #8 (0.72mm) swap to Latte Brown
    At layer #10 (0.88mm) swap to Sky Blue
    At layer #12 (1.04mm) swap to Bone White
    At layer #15 (1.28mm) swap to Jade White for the rest.