Saved by the Blood of Jesus - Hueforge 3 Color

Project: Saved by the Blood of Jesus.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 205.61x250mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2mm

Filaments Used:
    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
    #e2dedb PLA PolyLite White  Transmission Distance: 5
    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to Red
    At layer #14 (1.2mm) swap to White
    At layer #22 (1.84mm) swap to Black for the rest.